Queen Mattress Toppers

A queen mattress topper measures 60 by 80 inches, matching the mattress underneath it exactly. Every queen size topper mattress option here is cut to that footprint, so a mattress topper queen size buyers order will cover the bed without hanging over the sides or leaving the edges bare. If you are between sizes, the full topper is 54 by 75 and the king is 76 by 80.

No. A king mattress is 76 by 80 inches, so a queen topper leaves 16 inches of the bed uncovered across the width. The length is identical at 80 inches on both beds, so width alone rules it out, and a king topper or a cal king topper is the size to look at.

No. An Olympic queen measures 66 by 80 inches, six inches wider than a standard queen with the same length, so a queen topper leaves a strip of mattress bare down one side. The size is also sold as a super queen or an expanded queen, and Viscosoft does not currently make a topper cut to it.

No. An RV or camper queen is a short queen, which measures 60 by 75 inches, so a standard queen topper runs 5 inches too long and will buckle at the foot of the bed. Viscosoft makes a separate queen short topper cut to 60 by 75 for campers and RVs. Measure the mattress before ordering, since the two sizes look almost identical in a listing.

Match the thickness to how far off the mattress is. Two inches softens the surface of a bed that is nearly right, three inches is the most common choice and noticeably changes the feel, and four inches is for a mattress that is genuinely too firm. A 3 inch queen topper suits most people, and the topper finder narrows it down further if you are unsure.

Often not, and it is worth planning for. A 3 or 4 inch queen mattress topper raises the sleeping surface enough that standard fitted sheets stop reaching the corners, which is one of the most common complaints after a topper arrives. Add the mattress depth and the topper depth together, then look for sheets with an 18 inch pocket, and a mattress protector underneath adds another half inch or so to that total.

It can when the mattress has softened and stopped supporting you, which is a different problem from a mattress that is simply too hard. A firm mattress topper queen sleepers choose in high-density foam adds support back rather than cushioning on top of a sagging surface, and our pain relief collection groups the options built for it. Being straight about the limit: if the mattress is deeply sagging, no topper will fix the support underneath it.

Memory foam absorbs movement rather than passing it along, so a queen mattress topper does reduce what you feel when a partner turns over. The effect is limited by what sits underneath: a topper can dampen motion but cannot stop it travelling through an innerspring mattress. Thicker foam absorbs more, so a 4 inch topper does more than a 2 inch one on a queen bed shared by two people, and the Dusk topper is worth comparing if a softer feel matters as much as motion isolation.

No. A full mattress is 54 by 75 inches, so a queen topper is 6 inches too wide and 5 inches too long, and the excess folds up against the sides of the bed. Order the full size topper instead, which is cut to the smaller footprint.

No. A full mattress is 54 by 75 inches, so a queen topper is 6 inches too wide and 5 inches too long, and the excess folds up against the sides of the bed. Order the full size topper instead, which is cut to the smaller footprint.

Usually not without checking first. Sleeper sofa mattresses labeled queen are often shorter and thinner than a standard 60 by 80 bed, and the dimensions vary between manufacturers, so measure the mattress with the sofa fully open before ordering. Viscosoft makes toppers built for sleeper sofas if the measurements do not match.